Precor P80 Service Manual page 50

Note: Copying and pasting the file folder directly to the USB Flash Drive may take a
considerable amount of time or possibly time out. It is recommended to copy the file
to your desktop first.
Using the mouse, right click on the Precor folder containing the P80 software and select Copy.
7
Insert a flash drive device into your computer's USB port, when the removable disk drive appears in
8
the list under Computer, select it.
Right click the mouse on the removable disk and select Paste. The Precor folder containing the P80
9
software will then be copied onto the flash drive device. The P80 software on the flash drive is now
ready to download onto the P80 consoles.
10 Right click the mouse on the removable disk and select "eject" prior to removing the flash drive from
the USB port. The computer will respond with a message that it is safe to remove hardware, and then
you can remove the flash drive from the USB port.
Note: Do not change the file name, and do not copy any internal folder separately.
This folder is set up exactly as needed to correctly be recognized and downloaded by
the P80 consoles.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Figure 28: Flash Drive Device
Figure 29: Software Download_Flash Drive
Page 48