Precor P80 Service Manual page 29

P80 Settings Menu Table
Menu Item Description
System information screens provide
basic information including
About
equipment models and serial
numbers. Most of these screens are
for informational purposes only and
cannot be modified.
Equipment The Equipment Usage screens
Usage provide information on individual
usage as well as cumulative
equipment usage. This information on
these screens is accessible only to
administrators and Precor service
technicians.
System Use the System Settings to test your
Settings equipment and set parameters that
benefit your users and your facility.
The System Settings menu is visible
only to administrators and Precor
service technicians.
Software Toggled ON or OFF, this
Downloads setting allows software to be
automatically updated through the
Preva® network.
It is recommended that this remain
ON at all times. Contact Precor
Customer Service before this setting
is disabled.
Reflashing The P80 is equipped with advanced
boot-error recovery features. These
settings are used to view and control
software boot images. These settings
are used during a manual software
update, and for advanced
troubleshooting with Precor
assistance only.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Navigation Configure/View/Test
See Procedure,
Touch About
Menu
See Procedure,
Touch
Equipment Usage Menu
Equipment
(on page 32)
Usage
See Procedure,
Touch System
Settings Menu
Settings
34)
Touch radio button next
to On to Enable
Automatic Downloads.
Touch
Software Default is ON
Downloads
Touch radio button next
to Off to Disable
Automatic Downloads.
View and/or change the
Touch
active software boot
Reflashing
image.
About
(on page 29)
System
(on page
Page 27