Precor P80 Service Manual page 33

Menu Item Descriptions
Access Code) factory. This is a hardware address that
Address uniquely identifies each node of a
network.
Network Time These addresses are set at the factory
Server 1 and will not need to be changed in the
field.
Network Time
Server 2 and need be changed in the field.
Network Time
Server 3 and need be changed in the field.
Machine Type Type of equipment (AMT, RBK, UBK,
EFX, & TRM). Set at factory.

Touch BACK to exit "About" (back to "Settings" menu).
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
These addresses are set at the factory
These addresses are set at the factory
Configure/View/Test
Information Only
Information Only .Note: They
can be manually changed.
Information Only
Information Only
Page 31