Precor P80 Service Manual page 43

Test Equipment
Numeric
Backlight Test
All
Numeric Display
Test
All
Heart Rate
All
Step Count Reset
AMT12 Only

Touch BACK to exit "System Tests" (back to "System Settings" menu).
4
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Description
Touch Numeric Backlight Test.
1
This tests the back lights of the lower display just above
2
the paddle controls. The back lights of the display will
illuminate in sequence in the Backlight Test and then
automatically exit to the Systems Test screen.
Touch Numeric Display Test.
1
This will test the numeric LCD display just above the
2
machine control levers. All the numeric characters will be
displayed in sequence and then automatically exit to the
Systems Test.
Touch Heart Rate.
1
Grasp both of the heart rate grips on the handlebar, the
2
heart rate will be displayed after a couple of seconds.
Use a wireless heart rate strap or wireless heart rate
3
simulator, the heart rate will be displayed after a couple of
seconds.

Touch BACK to exit to Systems Test.
4
Note: Do this only when replacing the flat belts.
Touch Step Count Reset.
1
♦ The screen will display:
♦ Current total step count
♦ Step Count Reset
♦ Odometer Value at the last reset.
During this step it is necessary to pedal the AMT while the
2
Step Count is being reset, touch START.
♦ The Current Total Step Count will go to "0".
♦ The Step Count Reset will increment up.
♦ The Odometer will display the total miles recorded at the
time of the reset.

Touch BACK to System Tests.
3
Page 41