Precor P80 Service Manual page 59

P80 Display Settings Menu Table
Settings Settings
Options
♦ German
Language
♦ English
♦ Spanish
♦ French
♦ Italian
♦ Dutch
♦ Russian
♦ Japanese
Measurement
Units
US Standard or
Metric
Standby Mode
♦ 5 Minutes
Delay
♦ 15 Minutes
♦ 30 Minutes
♦ 60 Minutes
Time Zone
Note: This setting
GMT- 12 through
will be displayed
GMT + 12
only on software
version 3.0 or
earlier.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Factory Configure/View/Test
Default
Touch Language
1
Touch on a radio button next to the
2
desired language, a dot will fill the radio
button next to the selection.
Touch OK to save the selection. Touch
3
English
CANCEL to exit without saving the
selection.
Note: All menus and selection will be in the
language selected.
Touch Measurement Units
1
Touch on a radio button next to either US
2
Standard or Metric; a dot will fill the radio
button next to the selection.
US Standard
Touch OK to save the selection. Touch
3
CANCEL to exit without saving the
selection.
Touch Standby Mode Delay.
1
Touch on a radio button next to the
2
desired delay time, a dot will then fill the
radio button.
15 minutes
Touch OK to save the selection. Touch
3
CANCEL to exit without saving the
selection.
Touch Time Zone.
1
Touch on the radio button next to the
2
desired Time Zone, a dot will fill the radio
GMT – 00-
button.
10
Touch OK to save the selection. Touch
3
CANCEL to exit without saving the
selection.
Page 57