Precor P80 Service Manual page 46

Settings Settings Options
Speed Limit
(TRM only)
1-16 mph
Incline Limit TRM 883 Cross
(TRM only) Ramp incline range
can be set to 0%-
15%.
TRM 885 Cross
Ramp incline range
can be set to 0% to
15% Note: the incline
range is -3% to 15%
but the limit can only
be set from 0% to
15%
Auto Stop
(TRM only)
♦ ON
♦ OFF
Cross Ramp
Auto Level
Cross Ramp Auto
level settings are
(EFX only)
from 1% to 20%

Touch BACK to exit "Workout Limits" (back to "System Settings" menu).
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Factory Configure/View/Test
Default
Touch Speed Limit
1
The on-screen keypad will appear,
2
enter the desired duration using the
16 mph
keypad.
Touch FINISH to exit to the Workout
3
Limits screen.
Touch Incline Limit
1
The on-screen keypad will appear,
2
enter the desired duration using the
15
keypad.
Touch FINISH to exit to the Workout
3
Limits screen.
Touch Auto Stop
1
Touch on a radio button next to either
2
ON/OFF, a dot will then fill the radio
ON
button next to the selection.
Touch OK to exit to the Workout Limits
3
menu.
Touch Cross Ramp Auto Level
1
Touch the
2
the desired setting.
10
Touch OK to exit to the Workout Limits
3
menu.

to move auto level to
Page 44