I-Luminate; Extended Display Keypad Functions; I-Luminate Mode; Viewing Mode - Barco Coronis Uniti MDMC-12133 User Manual

Left key Right key
No Push Push
4.7

I-Luminate

About I-Luminate
When the display is in power on mode and the OSD menu is not shown, I-Luminate can be activated by
touching the I-luminate/left key.
When touching the I-Luminate key, the display will enter the I-Luminate mode, for approximately 1 minute.
Touch the I-Luminate key again to immediately switch back to normal mode.
4.8

Extended display keypad functions

About extended display keypad functions
The concept of the extended display keypad functions is to present a selection of functions immediately
available to the user without the need to navigate through the OSD Menu.
The extended display keypad functions will only be available when no OSD menu is
visible on the screen.
4.8.1

I-luminate mode

To quickly change the I-luminate mode
1. While no OSD menu is on the screen, press the I-luminate/Left key to bring up the I-luminate quick
selection menu.
2. Toggle the available I-luminate modes (see "I-Luminate default mode", page 32) by pressing the Right
key.
4.8.2

Viewing mode

To quickly change the viewing mode
1. While no OSD menu is on the screen, press the Left key and Right key simultaneously to change the
viewing mode.
2. Toggle the available viewing modes (see "Viewing modes", page 34) by pressing the Left/Right key
simultaneously.
K5902079 CORONIS UNITI 21/04/2015
Behavior
Enable OSD
Left key Right key
No push Push
Push No push
Push Push
No push No push
4. Daily operation
Menu Behavior
No menu Cycle SoftGlow
modes between
task light, wall
light, both, none.
No menu Nothing
No menu Cycle viewing
mode between
text and
diagnostic
Menu
Enter the OSD
menu
27