Table of Contents
Advertisement
•
12V
•
V_DIMM
•
1.05V PCH
•
3.3AVCC
•
3.3VCC
•
3.3VSB
•
VBAT
Serial Port Console Redirection
COM1~COM5
Use this feature to enable console redirection for COM1~COM5. The options are
Enabled and Disabled.
Console Redirection Settings
Configure the following options for the Console Redirection Settings. The
most common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 38400, 57600, or 115200
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Flow Control: None or Hardware RTS/CTS
VT-UTF8 Combo Key Support: Enabled or Disabled
Recorder Mode: Disabled or Enabled
Resolution 100x31: Disabled or Enabled
Legacy OS Redirection Resolution: 80x24 or 80x25
PuTTY Keypad: VT100, Linux, XTermR6, SCO, ESCN, VT400
Redirection After BIOS POST: Always Enable, Bootloader
Serial Port for Out-of-Band Management / Windows Emergency
Management Services (EMS)
Use this feature to enable console redirection.
7-23
Chapter 7: BIOS
Advertisement
Table of Contents
