3-1
Control Panel Buttons
The SC101i chassis includes one power on/off push-button on the front of the
chassis.
Power
The main power button is used to apply or remove power from the power supply
to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system. Therefore, you must unplug
the system before servicing.
This button features an LED that indicates hard drive activity as follows:
•
Blue – Power on
•
White – HDD activity
Figure 3-1. Power Button and Hard Drive Activity LED
Chapter 3
System Interface
3-1
Chapter 3: System Interface
Power Button