Table of Contents
Advertisement
1-1
Overview
The SuperServer 1018L-MP is a compact, embedded system comprised of the
SC101i chassis and the X10SLV single processor motherboard. Refer to our web
site for information on operating systems that have been certified for use with the
system (www.supermicro.com).
For your system to work properly, please follow the links below to download all
necessary drivers and utilities, and the user's manual for your server.
•
Supermicro product manuals:
•
Product drivers and utilities:
•
Product safety info:
If you have any questions, please contact our support team at:
support@supermicro.com.
This manual may be periodically updated without notice. Please check the
Supermicro Web site for possible updates to the manual revision level.
1-2
Motherboard Features
The server is built around the X10SLV, a single processor motherboard based on
the Intel H81 chipset. Below are the main features. Figure 1-1 is a block diagram
of the chipset.
Processors
The X10SLV supports a single 4th Generation Intel Core i7, i5, i3, Pentium/Celeron
processor. Refer to the web site for a complete listing of supported processors
(www.supermicro.com).
Memory
The board has two DIMM slots that can support up to 16GB of Non-ECC DDR3
SODIMM up to 1600MHz memory. See Chapter 5 for details.
Chapter 1
Introduction
http://www.supermicro.com/support/manuals/
ftp://ftp.supermicro.com
http://super-dev/about/policies/safety_information.cfm
1-1
Chapter 1: Introduction
Advertisement
Table of Contents
