SUPERSERVER 1018L-MP User's Manual
5-4
Installing Memory
Memory Support
The X10SLV motherboard supports up to 16GB of DDR3 non-ECC SO-DIMM up
to 1600MHz in two low-profile horizontal slots. Check the Supermicro website for
a list of memory modules that have been validated.
Installing the Memory DIMMs
Insert one or two SO-DIMMs into the memory slots, starting with DIMMA1, then
DIMMB1. See instructions on the next page.
Exercise extreme care when installing or removing DIMM modules to prevent
damage.
Figure 5-2. Memory Slots on the Motherboard
5-6
DIMMA1
DIMMB1