Power Button (Jf1) - Supermicro SUPERO SuperServer 1018L-MP User Manual

SUPERSERVER 1018L-MP User's Manual

Power Button (JF1)

OH/Fan Fail LED
Power Button
The power button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. To turn off the power when set
to suspend mode, press the button for at
least four seconds.
Power LED
The power LED connection is located on
pins 15 and 16 of JF1.
HDD LED
The HDD LED connection is located on
pins 13 and 14 of JF1. Attach a hard drive
LED cable here to display disk activity (for
any hard drive activities on the system,
including Serial ATA and IDE).
Power LED
HDD LED
NIC1 LED
NIC2 LED
X
Ground
Ground
2
Figure 5-5. Control Panel Header Pins
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
X
Reset
Reset Button
Power Button
PWR
1
Pin#
1
2
Pin Definitions
Pin#
15
16
Pin Definitions
Pin#
13
14
5-14
Power Button
Pin Definitions
(JF1)
Definition
Signal
Ground
Power LED
(JF1)
Definition
+3.3V
Ground
HDD LED
(JF1)
Definition
+3.3V
HD Active