Troubleshooting - Epson TM-T88V-DT-542 User Manual

English

Troubleshooting

(Power) LED does not light
Check whether the AC adapter is correctly connected. (U
Error LED is on
❏ Check whether the roll paper cover is correctly closed.
❏ If the Paper LED is on, check whether the roll paper is correctly installed and any roll paper
remains. (U
"Installing/Replacing the Roll Paper" on page 21
Error LED is flashing
❏ Check whether paper is jammed. If it is jammed, remove it. (U
❏ Printing stops if the thermal head overheats and resumes automatically when it cools.
❏ For other cases, turn the product off, and after 10 seconds, turn it back on.
Paper is jammed
K
!
CAUTION:
Do not touch the thermal head and the frame on its side because they can be very hot after printing.
When paper is jammed, never pull out the paper forcibly. Open the roll paper cover (U
the roll paper cover" on page 19
), and then remove the jammed paper.
"Connecting the AC Adapter" on page 9
)
"Paper is jammed" on page 24
Thermal head
)
)
"Opening
24