Figure 4-1. Removing the Front Door of the Tower Cabinet
Installing the Front Door of the Tower Cabinet
Note:
To install the front door of the tower cabinet, perform the following (see Figure
4-1).
1. Observe the safety and ESD precautions listed at the beginning of this
chapter.
2. Locate the bottom hinge slot underneath the front left-hand side of the
chassis.
3. Grasp the front door and slide its bottom hinge pin up into the chassis hinge
slot.
4. While still holding the front door slide its top door hinge into the hinge
opening located at the top left-hand side of the chassis and secure with a
screw.
This procedure is for tower-based systems only.
Disassembly and Reassembly 4-7