Table of Contents
Advertisement
7. Slide the hard disk drive bay into the chassis (see Figure 4-47).
8. Install the power cable from the power backpanel Power Connector to
Optional SCSI Hard Disk Drive Cage (see Figure 1-8) to the power
connector on the SCSI backpanel (see Figure 4-48, A).
9. Install the SCSI interface cable from the system board Optional Ultra 160/m
SCSI for Connector (see Figure 1-6) to the SCSI interface cable connector
on the SCSI backpanel (see Figure 4-48, B).
Figure 4-48. Installing the Power Cable and SCSI Interface Cable
4-50 Disassembly and Reassembly
Figure 4-47. Installing the Drive Bay
B
A
Advertisement
Table of Contents
Troubleshooting
