Opening And Closing The Front Door Of The Tower Cabinet - NEC Express5800 320La User Manual

Opening and Closing the Front Door of the
Tower Cabinet
Note:
You must open the front door to turn the server power on or off, mount or
dismount a hard disk drive, and access the CD-ROM drive or floppy disk drive.
Note:
media using a software command. Before issuing a software
command to eject the media, confirm that the front door is
open. If the command is executed while the front door is
closed the media may run into the front door resulting in an
error or may cause the unit to fail.
To open the front door of the tower cabinet, perform the following.
1. Observe the safety and ESD precautions listed at the beginning of this
chapter.
2. Unlock (if locked) the mechanical lock that is located approximately half
way up on the left-hand side of the front door and swing the door open. The
front door is unlocked by inserting the security key into the lock and turning
it clockwise a quarter turn. See Figure 4-1.
Figure 4-1. Unlocking and Locking the Front Door
4-6 CRU Replacement and Server Upgrades
This procedure is for tower-based systems only.
The CD-ROM drive has a function to eject the
Lock Unlock