Table of Contents
Advertisement
Reconfiguration
If a CPU or a memory DIMM board error was detected during execution of POST
(Power On Self-Test) after system power is turned on, the reconfiguration function
isolates the failed CPU or memory DIMM board and continues operation. You should
replace the failed device as soon as possible.
This function is enabled only when the following system requirements are met:
Two or more CPUs are installed.
!
Eight memory DIMM boards are installed.
!
A CPU or memory DIMM board error may be viewed on the screen while POST is
running or by entering BIOS Setup. It may also be viewed when the ESMPRO Suite
program is installed and operating.
System Overview 1-29
Advertisement
Table of Contents
Troubleshooting
