Table of Contents
Advertisement
4. Remove the four screws securing the blank cover of the bay where the
optional power supply will be installed and remove the cover, see Figure
4-55.
Note:
the optional power supply bay for future use.
Figure 4-55. Removing the Optional Power Supply Bay Blank Cover
5. Pull out the front lever of the new power supply to be installed.
6. Slide the power supply into the bay.
7. Secure the power supply by pushing its front lever firmly into towards the
bay until you hear it click and fasten with the four screws removed in step 4
above (see Figure 4-56).
Figure 4-56. Installing the Optional Power supply
4-56 Disassembly and Reassembly
Save the blank cover and screws removed from
Advertisement
Table of Contents
Troubleshooting
