Installing The Disk Array Unit In The Rack - NEC Storage S1300 User Manual

Installing the Disk Array Unit in the Rack

Once both left and right rail assemblies are correctly installed, the disk array unit can be
mounted into the rack cabinet.
1. With three or more persons assisting you, lift the disk array unit and position the
rear of the unit onto the rails. Then, push it into the rack cabinet.
The system can weigh up to 45 kg. To avoid personal injury, make
sure you have at least three people help you lift or move the system.
2. Insert two M5 bolts on each handle of the disk array unit to secure it to the rack.
Figure 2-9 Securing the Disk Array Unit to the Rack
2-10 Setting Up the System
! WARNING
M5 bolt