NEC Storage S1300 User Manual page 55

The procedure below describes how to install the left rail assembly to the rack cabinet.
Follow the same procedure to install the right rail assembly.
1. Locate the left rail support. With the hooks facing upward, hang the claw at the top
of the rail support on the square hole of the vertical mounting rail as shown in the
figure below. (The notches on the right rail support must face left.)
Rail support (L)
Figure 2-4 Installing the Rail Support
2. While holding the rail support, engage the holes on the front of the rail assembly
into the hooks.
Figure 2-5 Positioning the Front of the Rail Assembly
Top claw
Hook
Cutout
Setting Up the System 2-7