NEC Storage S1300 User Manual page 56

3. Secure the rail assembly to the rail support using two countersunk head screws
provided with the rack cabinet.
Figure 2-6 Securing the Front of the Rail Assembly to the Rail Support
4. Move to the rear of the rack and slightly loosen the four countersunk head screws
securing the inner and outer rails together (see Figure 2-7). These screws must not
be removed.
5. Pull the inner rail toward you and engage the upper and lower tabs into the square
holes on the rear vertical mounting rail. Secure the inner rail using two M5 bolts.
2-8 Setting Up the System
Figure 2-7 Securing the Rear of the Rail Assembly
Countersunk head screw
Inner rail
M5 bolt
Countersunk head screw