When inserting the LAN card into the disk array unit, push it as far as
it will go and then secure it with the screw. Incorrect insertion may
cause malfunction.
Connection to UPS Systems
Ask your sales agent for information on connecting your system to a UPS.
If you want to change the current system connection, contact your service
representative. If you change the connection by yourself, the UPS will start at power
failure but may fail to function normally. Consequently, operation may stop or data
may be lost.
To power
board
To power
board
Figure 1-9 Example of Connection to UPS Systems
! CAUTION
OUTPUT 1
OUTPUT 2
Straight cable
OUTPUT 1
OUTPUT 2
Disk Array Unit
AC POWER
AC POWER
System Overview 1-13