NEC Storage S1300 User Manual page 93

9. Insert the controller as far as it will go, and close the ejector.
Figure 4-5 Closing the Ejector of the Replacement Controller
10. Strongly push the ejector (the part indicated by the arrow in the figure) until the
controller is inserted firmly.
Figure 4-6 Pushing the Ejector of the Replacement Controller
11. Secure the ejector with the screw.
Figure 4-7 Securing the Ejector of the Replacement Controller
12. Connect the FC cables removed in step 2 as they were before.
Problem Solving 4-7