Preparing The Computer For Network Printing; Installing Epsonnet Direct Print - Epson AcuLaser C8600 Administrator's Manual

c
Starting Easy Setup from the Start menu
If you have already installed EpsonNet WinAssist on your
computer, you can start EpsonNet WinAssist Easy Setup from the
Start menu.
Click Start, point to Programs and then select EpsonNet
WinAssist. Click EpsonNet EasySetup. When the EpsonNet
WinAssist Easy Setup dialog box appears, click Next and then go
to step 4 in "Setting an IP address to the Printer Using EpsonNet
Easy Setup" on page 19 for detailed instructions on using
EpsonNet WinAssist Easy Setup.

Preparing the Computer for Network Printing

If you are the network administrator, instruct your clients to
install the printer driver and the network utilities (such as
EpsonNet Direct Print) on their computers so they are ready for
network printing. EpsonNet Direct Print must be installed on all
the computers to use TCP/IP printing.

Installing EpsonNet Direct Print

To print using TCP/IP from Windows Me/98/95, the computer
must have EpsonNet Direct Print installed. Use the following
procedure to install EpsonNet Direct Print.
Caution:
It takes two or three minutes to send new settings to the
Internal Print Server. Do not turn off your printer until an
on-screen message appears instructing you to do so.
Easy Setup for Windows Me/98/95
2
2
2
2
2
2
2
2
2
2
2
2
23