Turn Off The Computer, And Turn It Over And Remove The Battery And Component Bay Cover (See Pages 6 - 4 & 6 - 5) - EUROCOM m238 User Manual

1. Turn off the computer, and turn it over and remove the battery and component bay
cover (see pages 6 - 4
2. The memory sockets will be visible at point
3. Gently pull the two release latches (
in the direction indicated below.
& 6 - 5).
on the mainboard.
1
1
)
& on the sides of the memory sockets)
2 3
2
Upgrading The Computer
3
Upgrading the System Memory (RAM) 6 - 17
Figure 6 - 11
RAM Module
Location

Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.
Figure 6 - 12
RAM Module
Release Latches
6