3G Module - EUROCOM m238 User Manual

3G Module

If you have included an optional UMTS/HSPDA+ based 3G Module (Universal
Mobile Telecommunications System or High Speed Packet Access) module (see
"Communication" on page D - 4
you do not require a driver/application installation for Windows 8. Follow the in-
structions overleaf to install the USIM card (which will be provided by your service
provider), and then use the Charms Bar Wireless icon to access the 3G network
in the same manner as the WLAN (see page
If your purchase option includes both Wireless LAN and 3G modules, then the appropriate
antennas will be installed. Note that In order to comply with FCC RF exposure compliance
requirements, the antenna must not be co-located or operate in conjunction with any other
antenna or transmitter.
Important Notice - 3G & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3G module and the
Bluetooth/Wireless LAN modules at the same time as this may disrupt radio frequency, and
cause interference. When the 3G module is powered on, make sure that the Bluetooth/
Wireless LAN modules are powered off (use the PC Settings > Wireless control panel to
turn on/off individual modules - see
for specification details) in your purchase option,
7 - 77).

Important Notice
Figure 7 - 64 on page 7 - 79).
Modules
3G Module 7 - 75
7