Table of Contents
Advertisement
Travel Considerations
Packing
As you get ready for your trip, run through this list to make sure the system is ready to go:
1.
Check that the battery pack and any spares are fully charged.
2.
Power off the computer and peripherals.
3.
Close the display panel and make sure it's latched.
4.
Disconnect the AC/DC adapter and cables. Stow them in the carrying bag.
5.
The AC/DC adapter uses voltages from 100 to 240 volts so you won't need a second voltage adapter. However,
check with your travel agent to see if you need any socket adapters.
6.
Put the notebook in its carrying bag and secure it with the bag's straps.
7.
If you're taking any peripherals (e.g. a printer, mouse or digital camera), pack them and those devices' adapters
and/or cables.
8.
Anticipate customs - Some jurisdictions may have import restrictions or require proof of ownership for both hard-
ware and software. Make sure your "papers" are handy.
Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a
notebook which is powered on in a travel bag may cause the Vents/Fan Intakes to be blocked. To prevent your computer
from overheating make sure nothing blocks the Vent/Fan Intakes while the computer is in use.
Power Off Before Traveling
Preface
XIII
Advertisement
Table of Contents
