Connecting smart computer and smartphone
• Smartphone use
When measuring, turn the smartphone display off, and with Cateye Cycling™ running,
store the smartphone in a safe place such as a bag or pocket.
As measurement start/pause/resume and reset operations (finish trip) can be performed
remotely from smart computer, there is no need to take out your smartphone until you
want to save or upload trips.
* Cateye Cycling™ can measure even when running in the background.
• Restrictions on measurement
In Mirror Mode, the maximum elapsed time that can be measured is approximately 27
hours and maximum trip distance is 1000 km [620 mile]. When either of these values is
exceeded, measurement finishes and trip data is saved temporarily.
In this case, the display returns to the [ready] (measurement standby) screen ready to
start the next trip measurement.
Starting measurement
When smart computer is on the [ready] (measurement standby) screen, pressing MODE
for 1 second starts measurement.
* If the connection with the smartphone is interrupted during measurement, smart
computer switches to the smartphone search screen. When the connection is
reestablished, Smart computer returns to the measurement screen.
Pausing/resuming measurement
Pressing MODE for 1 second displays [PAUSE] and pauses measurement.
Pressing MODE again for 1 second resumes measurement.
Smartphone and smart computer
Preparation before measurement
Measurement
Important
Smart computer
(1 second)
Measurement
standby
Smart computer
Measurement
starts
Need help?
Do you have a question about the Strada Smart CC-RD500B and is the answer not in the manual?