Cateye Strada Smart CC-RD500B Online Manual page 130

• Pairing (sensor ID synchronization) must be performed in order to use smart computer and
sensors.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause smart computer to be paired with another device.
1. From (MENU) at the top left of the screen, turn on [Connect], and
then tap [Device].
Tap [Device Pairing] to start pairing.
For instructions on using devices, refer to the following:
1. On the measurement screen, press MODE for 1 second to display the
smartphone search screen.
When Cateye Cycling™ detects smart computer, a message is displayed on the
smartphone.
Tap [Pair] to complete pairing.
After pairing is completed, from
switch to the Trip screen.
Pairing
Important
Smartphone
Pairing with smart computer
Smart computer
Smartphone search
screen
Smartphone
(MENU) at the top left of the screen, tap [Trip] to