Cateye Strada Smart CC-RD500B Online Manual page 116

• "Finishing a trip" refers to resetting smart computer (by pressing MODE for 3 seconds).
This action resets measurement values to 0 and changes the screen to the "ready"
display. You can then start measuring your next trip.
What does "completing measurement" mean?
• "Completing measurement" refers to saving and uploading a trip or a series of trips from
the save & upload screen in Cateye Cycling™. You can do this by tapping
the trips screen in Cateye Cycling™.
Why is data sometimes not saved as summary data even after a reset operation?
• Measurements for trips of 0.1 km or shorter are not saved as summary data.
Why can't I upload activities to a service site?
• Have you completed login settings for each service site? From Cateye Cycling™, tap
(MENU) - [Account], and then complete login settings by entering account information for
each site.
Posting to Facebook is not possible (If using an iPhone)
• Turn [ON] Cycling under Facebook in the iOS settings.
If you cannot create a post even when set to [ON], turn the setting [OFF] once and then
turn it back [ON].
Why does my smartphone battery drain so quickly?
Have you been leaving [Connect] turned on in Cateye Cycling™ even when you are
not performing measurement?
• It is recommended that you turn off [Connect] from
smartphone battery drain.
Data is not saved
Data cannot be uploaded
(MENU) to minimize
(flag) on