Connecting smart computer and smartphone
To use the automatic lap function, it must be turned on before starting measurement.
This section also explains the quick set feature for quickly configuring settings from the Trip
screen.
1. Tap
(MENU) and then [Trip].
2. Tap [Quick Set] on the upper right of the screen.
• Auto Lap
Select ON or OFF for the automatic lap function.
* Set the method—distance, time, or map—to be used for the automatic lap function.
Navigate to the following screens to change settings.
General : Auto Lap
3. Tap
(back).
The display returns to the Trip screen.
Smartphone and smart computer
Preparation before measurement
Smartphone
Measurement
Saving and uploading trips
Need help?
Do you have a question about the Strada Smart CC-RD500B and is the answer not in the manual?