Cateye Strada Smart CC-RD500B Online Manual page 27

The whole display turns on and then switches to the smartphone search screen.
Press MENU to proceed to the next step.
* If smart computer switches to the measurement screen without the whole screen turning
on, it has not been formatted. Redo the procedure.
2. Display the desired measurement unit.
Press MENU to proceed to the next step.
3. Pair a sensor.
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
• Pairing (ID synchronization) must be performed in order to use a sensor.
• Avoid pairing sensors at a race venue or in similar locations where there are many
other users. Doing so may cause smart computer to be paired with another device.
• Pair all sensors that you intend to use.
Activate the sensor that you want to pair.
Activating the sensor
Whole display
turns on
Important
Smartphone search
screen