If you enter a desired value for total distance, you can start your next trip from that value.
* This function is useful when you want to continue from the same distance after purchasing a
new smart computer or when resetting smart computer.
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Enter the total distance.
* Decimal values cannot be entered.
Smart computer
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Function setting
Total distance manual input
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)