Cateye Strada Smart CC-RD500B Online Manual page 127

Have you paired the sensor?
• The sensor must be paired with Cateye Cycling™ or with smart computer.
When measuring in Mirror Mode
When measuring in Sensor Direct Mode or using smart computer by itself
The electrode pad may have slipped out of position.
• Check that the electrode pad is still in close contact with your body.
Your skin may be dry.
• Wet the electrode pad a little.
The electrode pad may have deteriorated or become damaged due to prolonged
usage.
• If this is the case, replace the attachment belt with a new one.
Frequently Asked Questions
Measurement does not work :
Cannot measure heart rate
Why isn't the [H] icon flashing?