Cateye Strada Smart CC-RD500B Online Manual page 79

The following section explains how to pair a smart computer with a sensor and how to
configure various settings.
• Device settings are shared when smart computer is connected to your smartphone.
If settings differ, you will be prompted to select which settings to sync.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing (Sensor ID synchronization)
3. Tire circumference setting
1. Tap (MENU) and then [Device].
These settings can only be configured when your smartphone is connected to smart
computer.
Smartphone and smart computer
General
Device
Important
Smartphone
Smart computer
Important