Table of Contents
Advertisement
8.1 Displaying single values
The single values of the last 480 tests are displayed. The monitor displays blood
pressure and blood glucose values in a mixed sequence. The time of the test
decides the sequence. The most recent result is displayed first and the oldest last.
The monitor shows the date and time of the test alternately with the test result.
The monitor must be switched off. Press 'M'.
1
The initial display is shown briefly.
2
01 is displayed briefly (Figure 1) and then the result of the last blood
pressure or blood glucose test (Figure 2).
The date and time are displayed alternately. (Figure 3)
Fig. 1
Every time the 'M' button is pressed the previous result is displayed. A
3
maximum of 480 earlier results can be viewed. After the last available result
the most recent result is shown again.
You can cancel the procedure at any time. Press the ON/OFF button or wait
4
until the monitor switches off automatically after three minutes.
8.2 Displaying average blood glucose values
You can display the average values of your blood glucose readings for the last 7,
14, 21, 28, 60 and 90 days. At the same time the monitor shows how frequently you
have conducted tests over this period.
Beurer BGL40 mg/dL
Fig. 2
Fig. 3
38
Advertisement
Table of Contents
