Before The Blood Pressure Measurement - Beurer BM 64 Instructions For Use Manual

blood pressure monitor. As soon as you unplug the mains
part, the blood pressure monitor loses the date and time set-
ting but the saved measured values are retained.
Adjusting the settings
Make sure that the device's settings have been set correctly so
you can make full use of all its functions. Otherwise you will not
be able to save your measured values with the date and time and
access them later.
There are two different ways to access the settings menu:
• Before initial use and after each time you replace the battery:
When inserting batteries into the device, you will be taken to
the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched on, press and hold
three seconds.
Set these settings in the order shown below:
Hour format ➔ Date
Press to confirm your selection each time.
Time format
Time format flashes:
• Press < / > to select the time format
Date
The year flashes:
• Press < / > to select the year
The month flashes:
• Press < / > to select the month
The day flashes:
• Press < / > to select the day
for approx.
Time Bluetooth
➔ ➔
If the time format is set to the 12-hour format, the order in
which the day and month are displayed is reversed.
Time
The hour flashes:
• Press < / > to select the hour
The minutes flash:
• Press < / > to select the minutes
Bluetooth ®
The Bluetooth ® symbol flashes on the display.
• Press < / > to select whether automatic Bluetooth
fer is activated (
firm this by pressing
Bluetooth ® data transfers will shorten the battery life.

6.2 Before the blood pressure measurement

General rules when measuring your own blood
pressure
®
• In order to generate an informative profile of changes in your
blood pressure that can be used for comparisons, you should
measure your blood pressure regularly and always at the same
time of day.
Measure your blood pressure twice a day: once in the morn-
ing after getting up and once in the evening.
• Always perform the measurement when you are sufficiently
physically rested. Avoid taking measurements at stressful
times.
• Do not take a measurement within 30 minutes of eating, drink-
ing, smoking or exercising.
• Before the initial blood pressure measurement, make sure al-
ways to rest for about 5 minutes.
27
®
) or deactivated (
.
data trans-
) and con-