Triggering Or Clearing Alarm Output Manually - HIKVISION DS-7608NI-K2/8P/4G User Manual

8.7 Triggering or Clearing Alarm Output Manually

Purpose:
Sensor alarm can be triggered or cleared manually. If "Manually Clear" is selected in the dropdown
list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the
following interface.
Step 1 Select the alarm output you want to trigger or clear and make related operations.
Menu> Manual> Alarm
Step 2 Click Trigger/Clear button if you want to trigger or clear an alarm output.
Click Trigger All button if you want to trigger all alarm outputs.
Click Clear All button if you want to clear all alarm output.
Network Video Recorder User Manual
Figure 8-19 Clear or Trigger Alarm Output Manually
163