Turn Signals & Headlight High/Low Beams; Overdrive Lock-Out Switch; Hazard Flasher - Monaco LaPalma Owner's Manual

Turn Signals &
Headlight High/Low
Beams
Overdrive Lock-out
Switch

Hazard Flasher

8 • 338
Moving the arm upward will activate the right hand turn signal circuitry.
A downward movement will activate the left hand turn signal circuitry. When
the headlights are ON pushing the arm away from steering wheel will switch
the headlights from low to high beam. This position will require a slight pull
towards the steering wheel to change from high to low beam. There is blue
headlight indicator in the dash cluster which indicates when high beams are
selected. The headlight ICC circuitry can be operated by momentarily pulling
the arm all the way up towards the steering wheel and releasing. This
procedure, when repeated several times in succession, will flash the
headlights.
The lock out overdrive is for towing or direct drive transmission
operation. Push in on the button located on end of shift lever and the
indicator light on the lever dash cluster will illuminate. This should be
engaged for mountain driving. Return to overdrive operation by pushing the
button in and release. The indicator light on the lever will go out. This is the
normal indication.
The flasher button is located on the top of the steering column.
• To turn four way flasher on, push in on flasher button. This will
release the switch and activate the flashers circuitry.
• To shut off the flasher again push in on the push button, locking
the button inward.
Electrical Systems
OM090292
2004 • LaPalma