Monaco LaPalma Owner's Manual page 241

• AUDIO SETTING MEMORIES (P1/P2/P3) - Three pre-set
buttons are provided on this unit to store desired audio level positions
into memories which can be easily recalled. To set any of the 3 audio
memories, use the following procedure:
1. Use the Select button and Level control to adjust the setting of
the volume, treble, bass, balance and fader to the desired
positions.
2. Press the Select button to call any of the audio functions on the
display. Within 2 seconds of pressing the Select button, and
while the audio function is still on the display panel, press the
pre-set button (1 through 3) to be set and continue to hold it in.
After approximately 2 seconds, the pre-set number ("P-1",
"P-2", or "P-3") will appear on the display panel indicating that
the audio levels are now set into that memory position. The
settings can be recalled at any time by pressing the Select button
and then the pre-set button within 2 seconds.
• AUDIO MUTE (MUTE) - This button is used to mute the volume from
the system. By pressing the button, the indication "MUTE" will appear
on the display panel and the volume will be muted. Pressing the Mute
button again will return the volume level to the setting in use before the
Mute function was activated.
• AM/FM BAND SELECTOR (BAND) - During radio operation, each
momentary press of this button will change the radio band. The
indication "AM1", "AM2", "FM2", or "FM3" will appear on the display
panel according to your selection.
• MANUAL UP/DOWN TUNING & AUTOMATIC SEEK
TUNING (TUN) - Each time the right arrow button is tapped, the radio
will tune one frequency step higher. Similarly, each tap of the left arrow
button will tune one frequency step lower. To manually tune in a station,
tap the button of the appropriate direction until the desired frequency is
reached. Pressing either button for longer than 0.5 seconds and then
releasing will activate the Automatic Seek Tuning function. The radio
will seek the next available station and stop at the frequency. The Seek
function can be stopped by pressing the button again or activating any
other tuning function.
2004 • LaPalma
Equipment
5 • 241