Monaco LaPalma Owner's Manual page 233

NOTE: The picture quality from the outdoor TV antenna varies depending on
the location of the TV station in relationship to the location of the TV antenna. If
picture quality is degraded and you are not using an external power supply, try
turning the TV Antenna Power button located on the control box OFF and ON.
To Watch TV Using Cable Signal:
To view Cable TV signals on the main TV, press the CABLE TV button above the area marked
"Main TV." Follow the same procedure for TV 2 or exterior TV. Turn TV ON and select channel.
NOTE: To view Cable TV signals, you must be connected to a Cable TV input on
the outside of the motorhome. Cable TV inputs are available at many of today's
campgrounds.
To Watch TV using Satellite Signal:
To view Satellite signals on the main TV, press the SAT button above the area marked "Main TV."
Follow the same procedure for TV 2 or exterior TV. Turn TV ON and select channel 3. Use
Satellite receiver to select channels.
To Watch TV using VCR Signal:
To view VCR signals on the main TV, press the VCR button above the area marked "Main TV."
Follow the same procedure for TV2 or exterior TV. Turn TV ON and select channel 3. Turn VCR
ON and insert video tape to view.
To Watch TV using DVD Signal:
To view DVD signals on the main TV, press the DVD button above the area marked "Main TV".
Follow the same procedure for TV2 or EXTERIOR TV. Press DVD MODULATOR button to
choose CH3 or CH4. Turn TV ON and select channel to match DVD MODULATOR channel
chosen. Turn DVD ON and insert DVD disc to view.
To View Auxiliary Components using TV:
To view Auxiliary signals, such as game consoles, camcorder, etc,. on the main TV, press the AUX
button above the area marked "Main TV." Follow the same procedure for TV 2 or exterior TV.
Recording Using VCR:
To record programming from the Antenna, Satellite Receiver, Cable TV or Auxiliary, simply press
the appropriate button above the section marked VCR.
• To record programming from the TV Antenna to the VCR, press the TV ANT button
above the VCR section on the switch box.
• To record programming from the Satellite Receiver to the VCR, press the SAT button
above the VCR section on the switch box.
• To record programming from an Auxiliary device to the VCR, press the AUX button
above the VCR section on the switch box.
• To record programming from Cable TV to the VCR, press the CABLE TV button above
the VCR section on the switch box.
2004 • LaPalma
Equipment
5 • 233