Booth Dinette; Bed Conversion (Opt) - Monaco LaPalma Owner's Manual

Table of Contents

Advertisement

To Store Table:
• Lift table up and push table leg lock to release support leg.
• Fold support leg against bottom of table top so that it locks in
stored position.
• Lower table top into stored position.
• Lift or remove the seat cushions to permit the
table to swing down into position.
• With a firm grip, lift front edge of the table
approximately six inches and push table leg lock
to release the support leg.
• Swing the table leg up locking the leg into the
horizontal position.
• Continue lifting table until table stays are clear of
retainers. Pull outward and lower table down.
• Use both seat cushions and one back cushion for a
mattress. Leave one back cushion in a vertical
position.
WARNING: Do not occupy the booth dinette, if not
equipped with safety belts or the dining chairs while the
motorhome is in motion. To avoid personal injury to
occupants in case of a crash or sudden stop, chairs must be
stored in an enclosed area or secured with tie down straps
while the motorhome is in motion.
2004 • LaPalma
031068
Equipment

BOOTH DINETTE

Bed Conversion (Optional)
020163
5 • 227

Advertisement

Table of Contents
loading

Table of Contents