Transmitting An Sdm - Icom IC-F60 Instruction Manual

. Transmitting an SDM

D General
The short data message, SDM, can be sent to an individual sta-
tion or group stations. Also, 8 SDM memory channels are available
and the messages can be edited via PC programming.
D Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then push
[ ]/[
w Push [P1] (Digital) again, then push [
desired SDM.
Or, you can select the desired SDM using [Status Up]/[Status
Down] key directly.
e Push [P0] (Call) or [PTT]* to transmit the SDM to the selected
station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby con-
dition automatically when the transmission is successful.
] to select the desired station/group code.
SDM is displayed.
BIIS OPERATION
]/[ ] to select the
4
4
30