Icom IC-F60 Instruction Manual page 23

D TX code number edit
If the transceiver has [TX Code CH Select] or [TX Code Enter] as-
signed to it, TX code contents can be edited within the allowable
digits.
TO EDIT A TX CODE VIA [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select] to enter the TX code channel selec-
tion mode.
• Select the desired channel using [
w Push [TX Code CH Select] for 1 sec. to enter the TX code edit
mode.
e Push [TX Code CH Select] to select the desired digit to be ed-
ited.
r Set the desired digit using [
Code CH Down].
t Push [TX Code CH Select] to set the digit. The editable digit will
move to the right automatically.
y Repeat r and t to input all allowable digits.
u Push [Call] or [PTT] to transmit the selected TX code.
TO EDIT A TX CODE VIA [TX CODE ENTER] KEY:
q Select the desired TX code channel via [TX Code CH Up]/
[TX Code CH Down].
w Push [TX Code Enter] to enter the TX code edit mode.
e Push [TX Code Enter] to select the desired digit to be edited.
r Set the desired digit using [
[TX Code CH Down].
t Push [TX Code Enter] to set the digit. The editable digit will
move to the right automatically.
y Repeat r and t to input all allowable digits.
u Push [Call] or [PTT] to transmit the selected TX code.
CONVENTIONAL OPERATION
(PMR or BIIS PMR operation only)
]/[ ] if necessary.
]/[ ]/[TX Code CH Up]/[TX
]/[ ]/[TX Code CH Up]/
3
3
16