. User set mode
User set mode is accessed at power ON and allows you to set
seldom-changed settings. In this case you can "customize" trans-
ceiver operation to suit your preferences and operating style.
Entering the user set mode:
q While pushing and holding [
enter the user set mode at power ON.
w Push and hold [P0] to enter user set mode. Push [P0] momen-
tarily to select the item.
Then push [
Available set mode functions:
• Backlight
• Beep
• SQL Level
• AF Min level
• Mic Gain
• Battery Voltage : ON or OFF
e Push and hold [P0] again to exit set mode.
User set mode is also available using a programmable key. Please
refer to p. 11 [User Set Mode] section.
] and [
] to set the desired level/condition.
: ON, Auto or OFF
: ON or OFF
: 0 to 255
: ON or OFF
: 1 to 5
CONVENTIONAL OPERATION
] and [
], rotate [VOL] to
3
3
18