Transmitting A Status - Icom IC-F60 Instruction Manual

4
BIIS OPERATION

. Transmitting a status

D General
The status message can be selected with the programmed text,
and the message text is also displayed on the function display of
the called station.
Up to 24 status types (1 to 24) are available, and the status mes-
sages 22 and 24 have designated meanings.
Status 22: Emergency*
Status 24: GPS request
* The status 22 can also be used as a normal status message by
disabling the designated meaning. However, the status 24 is fixed.
The status call can be sent with both individual and group calls.
D Transmitting a status
q While in the standby condition, push [P1] (Digital), then push
[ ]/[
w Push [P1] (Digital) again, then push [
desired status message.
Or, you can select the desired status message using [Status
Up]/[Status Down] key directly.
e Push [P0] (Call) or [PTT]* to transmit the status message to the
selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby con-
dition automatically when the transmission is successful.
29
] to select the desired station/group code.
Status message is displayed.
]/[ ] to select the