D Calling Back From The Queue Channel - Icom IC-F60 Instruction Manual

D Calling back from the queue channel

q While in the standby condition, push [P1] (Digital) for 1 sec. to
enter queue memory channel selection mode.
w Push [ ]/[
e Push [P0] (Call) or [PTT]* to call.
*PTT call can be made only when PTT call capability is permitted.
NOTE: When no answer back is received, the transceiver
repeats the call 3 times (default) automatically, and
is displayed during each call. However, an error beep
sounds and
received after the calls.
r Push [PTT] to transmit; release to receive.
t Push [P3] (Moni(Audi)) to send the "Clear down" signal.
] to select the desired record.
is displayed when no answer back is
" "
BIIS OPERATION
"
4
4
"
24