Table of Contents
Advertisement
3.
For the Electrician
– Remove the Allen key from the back of the filling pipe of the water tank – Fig. 141.
– Insert Allen key, turn a quarter turn to the left and open the cladding door – Fig. 142, 143.
– Pull the cover on the pellet boiler side forwards and remove it – Fig. 144.
– Remove the insulation – Fig. 145.
– Loosen the 3 screws at the front on the cover to the control panel – Fig. 146.
– Raise the cover, push it backwards and remove it – Fig. 147.
Fig. 141 Allen key
Fig. 143 Cladding door open
Fig. 145 Remove insulation
Fig. 147 Remove cover from control panel
Fig. 142 Opening the cladding door with the
Allen key
Fig. 144 Pull the cover on the pellet boiler
side forwards and remove it
Fig. 146 Loosen 3 screws
59
1/4
Advertisement
Table of Contents
