Table of Contents
Advertisement
2.
For the Installer
– Insert sensor for safety thermostat auger tube into the holder as far as possible – Fig. 90.
– Suspend auger motor from back via the lug and from front via the centering screw – Fig. 91.
– Secure auger motor with 2 M8x 16 screws – Fig. 92.
– Using hexagon screws M6x12 and a U-washer, screw gear into position on the auger at the base of the integral
fuel hopper – Fig. 93.
– Plug in the auger motor plug and proximity switch plug – Fig. 94.
Fig. 90 Insert sensor for safety thermostat
auger tube as far as possible
2 x
M8x16
Fig. 92 Screw the auger motor into position
Fig. 94 Connect plugs for auger motor and
proximity switch
1 x
2
M6x12
44
Lug
Fig. 91 Hook in auger motor
3
Fig. 93 Mount gear
1
Centering screw
Advertisement
Table of Contents
