Maintenance Settings - Jura IMPRESSA J9 One Touch TFT Instructions For Use Manual

Maintenance settings

T Press the ' < '
to '40 sec.'.
T Press the 'Save'
'Saved' appears briefly on the display.
'Latte macchiato'
T Press the P button to exit programming mode.
O
'Please select product:'
In the program item
following settings:
U
'Filter'
U
Activate the CLEARYL Blue filter cartridge (see Chapter 1 'Pre-
paring and using for the first time – Inserting and activating
the filter').
U
'Water hardness'
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 1 'Preparing and using for the
first time – Adjusting the water hardness').
U
'Rinse the coffee system'
U
The switch-on rinse must be started manually.
U
'Rinse the coffee system'
U
The switch-on rinse is started automatically.
U
'Rinse the milk system'
U
You are prompted to rinse the milk system 10 minutes after
preparation of a specialty coffee with milk.
U
'Rinse the milk system'
U
You are prompted to rinse the milk system immediately
after preparation of a specialty coffee with milk.
Example: Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a specialty coffee
with milk.
Precondition: 'Please select product:'
T Press the P button.
O
'Maintenance status (1/6)'
g T Turn the Rotary Switch until the program item
settings (3/6)'
T Press the 'Rinse the milk system'
'Rinse the milk system'
4 Permanent settings in programming mode
or ' > ' button to change setting for the interval
button.
'Maintenance settings (3/6)'
/ 'Manual'
/ 'Automatic'
/ 'After 10 min.'
/ 'Immediate'
is displayed.
is displayed.
you can make the
'Maintenance
button.
27